Electronic controller
Methanol Recovery
System and supplies for recovery of excess methanol.
You will need to return the hold harmless agreement to us before any parts on this page are shipped to you.  We sell them to assist you in your recovery efforts, but have no control over how you use them. 
!

Electronic Temperature Controller
!
120 / 240 Volt 16A Microprocessor based temperature controller

The ETC is a microprocessor based temperature controller suitable for switching 120Volts at up to 16Amps for heating or cooling applications making it suitable for a wide range of applications. 

This is a great universal controller for any application where switching 120Volts or temperatures outside that of a normal home thermostat is required.  The sensor with an 8' foot cable and instructions are included with the unit. 
We also sell the unit prewired with power cord and output cord for those who dont' want to wire their own.  This is a great option for those who aren't familiar with wiring. 

Specifications:
  • Temperature Setpoint Range:  -30° to 220°F
  • Differential range: 1° to 30°F
  • Input Voltage: 120VAC, 208, 240VAC
  • Pilot duty: 125VA at 120/208/240VAC
  • Sensor:  Thermistor, 2" long x 1/4"dia with 8' cable (included)
  • Control Ambient Temperatures
    • Operating:  -20° to 140°
    • Storage: -40° to 176°
  • Ambient humidity:  0 to 95% RH, non-condensing
  • Enclosure:  NEMA 1
  • Dimensions: 6.52" high x 2.7" wide x 2.48" deep
  • Agency Approvals: UL listed, file E94419, Guide XAPX, CSA certified, file LR68340, class 4813 02

    Relay Output Ratings - NO (NC)

    120V

    208/240V

    Full load amps

    16 (5.8) A

    8 (2.9 A)

    Locked rotor amps

    96 (34.8) A

    48 (17.4) A

    Resistive amps

    15 (5.8) A

    8 (2.9) A

    Horsepower

    1 (1/4) HP

    1 (1/4) HP

Prewired temp Contoller
!
120 Volt controller
We prewire the controller with an 8 foot premium grade 12 guage cord with molded plug.  Then add 8 feet of 14 guage 3 wire cord to the outlet side.  All you need to do is hook up the load and program the data.